Author Topic: Saw Trades Update November 2016  (Read 2509 times)

John Hebert

  • BCSFA member
  • Newbie
  • *
  • Posts: 10
    • View Profile
Saw Trades Update November 2016
« on: November 23, 2016, 03:57:04 PM »
Saw Trades Update November 2016
  Hopefully everyone had a great summer and are looking forward to 2017. The following are some points of interest in regards to the BC Saw Trades Program.
-   Scheduling 2017 classes for Year 1 & Year 2 are currently being planned out for early next spring by TRU.
-   TRU is currently accepting applications for the position of Saw Trades Instructor @ the Williams Lake Campus.
-   Recent revisions to Saw Trades test banks have shown very good results; with an 82% - 85% class average
-   Benchman Apprentices now @ 28 registered / another 20 – 30 waiting to register when much needed classes are scheduled.
-    On January 1, 2017 there will be a link on the ITA website for Certified Sawfilers; (formerly Circular Sawfiler) for those that meet the requirements of ITA, to challenge the Benchman C of Q exam.
-   What do Headfilers want more of in terms of review for Apprentices during their session @ school; IE:  Benefits of / how to best setup & use a Heat crawler on bandsaws, Stellite, welding practices…?
-   Bench course program soon to be put together by Greg Daykin; development of lesson plans & course curriculum. More bandsaw related equipment needed to offer complete program (see below)
Materials / Equipment Needed for Trade School:
-    complete Knee off newer Headsaw carriage (for Bench program)   
-    6”- 8” Norpac bandsaw guides & 4 pin guide mounts (for Bench program)
-    Still in need of a Pony (board) Edger (for Sawfiler program)       
             …check your boneyards!  (TRU will issue a tax receipt for donated equipment.)
•   Lindsay Langill (former TRU Dean) has moved on; see attached updated Contacts List for his replacement.   
If Apprentices or their Supervisor / Headfiler have any questions about the school or need help with their enrolment; check out the links below or don’t hesitate to call the appropriate person on the provided contact list.
 
Queen’s Printer – Saw Filer Manuals are available for purchase at:
•   Web – www.crownpub.bc.ca
•   Email – crownpub@gov.bc.ca

ITA Regional Advisors: http://www.itabc.ca/our-trades-training-system/apprenticeship-advisors
TRU (Thompson River University)  http://www.tru.ca/williamslake/programs/trades.html
BC Saw Filer’s Association –   http://www.bcsawfilers.com/

John Hebert / Gorman Bros Lumber
List of Contacts
ITA
Tracy MacLennan   Manager Industry Relations
Office   778-327-5891
Cel   604-366-3759
e-mail   tmacLennan@itabc.ca

    
Collen Rogan   Manager Program Standards
Office   778-327-5889
Cel   778-388-7473
e-mail   crogan@itabc.ca

TRU
Greg Daykin   Saw Trades Instructor
Office   250-392-8113
Cel   250-617-9553
e-mail   greg52@telus.net

    
Julie Dekowny   Apprentiship Co-ordinator
Office   250-371-5659
e-mail   jdekowny@tru.ca

    
Thomas Haag   Apprentiship  Co-Chairperson
Office   250-828-5119
e-mail   thaag@tru.ca

    
Peter Poescheck   Apprentiship Co-Chairperson
Office    250-828-5113
e-mail   poescheck@tru.ca

    
Baldev Pooni   (Interim) Dean of Trades
Office   250-828-5110
Cel   250-574-8977
e-mail   bpooni@tru.ca

    
SAWFILERS
Martin Vatkin   BC Sawfilers President
Office   250-679-3234
Cel   250-833-2452
e-mail   marty.vatkin@interfor.com

    
Trevor Shpeley   BC Sawfilers Secretary
Office   250-470-4310
Cel   250-542-7184
e-mail   Trevor.Shpeley@tolko.com

    
John Hebert   Gorman Bros Lumber
Office   250-768-6231
Cel   250-870-1960
e-mail   jhebert@gormanbros.com